DCO

Atmel XMega 32A4U in TQFP-44 with 0603 passives, three panel pots and three jacks. Firmware is Arduino via the Xmegaduino fork and the README gives the avrdude command. There is a main board and a piggyback board.

Documentation

• Bill of materials (BOM)
• Schematic

Links

• Source / files on GitHub
• Maker page

More from Russell McClellan

Eurorack Headphones Headphone amp and line output with quarter inch jacks Alpha Osc FPGA digital oscillator with very low aliasing and Alpha Juno waveforms Euromixer Four input utility mixer on a single quad op amp Hexbuffer Buffered multiple giving three copies of each of two normalled inputs Switch VCA Experimental switched-mode VCA as a cheap alternative to an OTA

More oscillator modules

Braids Mutable Instruments Plaits Mutable Instruments Edges Mutable Instruments CHORD VCO HAGIWO 3340 VCO diysynth Tom Yum Voxmachina 2OPFM Super Synthesis Castor & Pollux Winterbloom

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module