MiniDiv

Maker	Benjiao Modular
Type	Clock divider built on a CD4040
Mounting	Mixed
Width	—
License	Open source (CC BY SA 4.0 on the design files)
Difficulty	🔥 SMD (0805)

Clone of Based on a HAGIWO clock divider design. In v0.3 the LEDs mount on the back and shine through holes in the board to fix a clearance problem.

Documentation

• Assembly instructions
• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from Benjiao Modular

DaisyVerb Reverb module built around the Daisy Seed GranulArduino Granular synthesizer voice on an Arduino Hackable Delay PT2399 delay laid out for circuit bending and modification Kwantizer Arduino CV quantizer with DIP switch note selection MiniADSR Four parameter envelope generator in 4HP MiniAttenuMix DC coupled CV mixer with attenuverted inputs MiniBurst Analog burst generator MiniDelay Three knob PT2399 delay

More clock modules

Temps Utile mxmxmx / Patrick Dowling MultiClockDiv HAGIWO Shuffling Clock Multiplier 4ms SCM Breakout 4ms Rotating Clock Divider 4ms RCD Breakout 4ms Quad Clock Distributor Expander 4ms Divide & Conquer Nonlinear Circuits

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module