UC Clock Divider

Maker	David Haillant
Type	Arduino based eight output clock divider
Mounting	Through-hole (SMD pre-soldered)
Width	4 HP
License	Proprietary (GPL-3.0 covers the firmware, no hardware licence)
Difficulty	🌡️ Medium through-hole

Eight divider outputs off an Arduino Nano, with the division scheme set in code. Clock and reset share one TRS input. Feed it audio instead of a clock and you get sub octaves. Available as a PCB set with SMD pre-fitted, a full kit including the Nano, or assembled.

Documentation

• Assembly instructions

Links

• Source / files on GitHub
• Maker page
• Buy: Tindie

More from David Haillant

Simple VCO Analog voltage controlled oscillator Simple LFO Triangle and square LFO Simple VCA Three input voltage controlled amplifier DM77 Analog drum synth voice

More clock modules

Temps Utile mxmxmx / Patrick Dowling MultiClockDiv HAGIWO Shuffling Clock Multiplier 4ms SCM Breakout 4ms Rotating Clock Divider 4ms RCD Breakout 4ms Quad Clock Distributor Expander 4ms Divide & Conquer Nonlinear Circuits

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Suggest a correction or a missing module