UNO

Maker	Fihdi
Type	Voltage controlled oscillator and LFO with sync, PWM and sub
Mounting	Mixed
Width	8 HP
License	Proprietary (CC-BY-NC-4.0, noncommercial so not an open licence)
Difficulty	🔥 SMD (0805)

Switches between VCO and LFO range. Triangle, sine, saw, square and sub outputs, plus soft to hard sync and a PWM input that reaches 0 and 100 percent duty. Patching the IN jack turns it into a slew limiter. Three board design: an A-board, a B-board carrying the 1206 chip parts and an F-board front panel. The published gerbers and pick-and-place files let a fab assemble the surface mount side.

Documentation

• Bill of materials (BOM)
• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from Fihdi

SVF12 12dB per octave voltage controlled state variable filter BIPO Dual bipolar VCA and ring modulator with lock and mix DICE Sample and hold, white noise and comparator random source SCULPT ADSR envelope with CV over sustain and release, plus loop mode VCAR Voltage controlled attack release envelope and slew limiter MIDINT 8 channel MIDI to CV, gate and trigger interface with expanders MiniDrumkit Three channel WAV player with analog kick and hi-hat 16 Step Sequencer 16 step CV sequencer with four programmable gate channels

More oscillator modules

Braids Mutable Instruments Plaits Mutable Instruments Edges Mutable Instruments CHORD VCO HAGIWO 3340 VCO diysynth Tom Yum Voxmachina 2OPFM Super Synthesis Castor & Pollux Winterbloom

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module