Clock

Maker	Freemodular
Type	8 channel clock source with pulse width, phase shift and swing
Mounting	Through-hole
Width	8 HP
License	Open source (Hardware CC BY-SA 4.0, software GPL-3.0)
Difficulty	🌡️ Medium through-hole

Every channel is a different subdivision of one tempo, set from an OLED menu. Built around an ATmega with a two board sandwich.

Documentation

• Assembly instructions
• Bill of materials (BOM)
• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from Freemodular

Envelope Envelope generator and LFO with ADSR, AR and two looping modes RNG Random number generator for looping CV and gates Drift Perlin noise modulation source with four algorithms Quantizer 1V per octave quantizer with selectable scales ALU CV maths and logic: AND, OR, NOR, XOR plus sum, difference, max and absolute value Offset/Atten Dual attenuverter and offset for scaling, shifting and inverting signals Mixer 5 channel active mixer for audio or CV that can be daisy chained Output Stereo line output and headphone amplifier with a VU meter

More clock modules

Temps Utile mxmxmx / Patrick Dowling MultiClockDiv HAGIWO Shuffling Clock Multiplier 4ms SCM Breakout 4ms Rotating Clock Divider 4ms RCD Breakout 4ms Quad Clock Distributor Expander 4ms Divide & Conquer Nonlinear Circuits

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module