Curtis Dual VCA

Maker	Gerbster
Type	Dual VCA built on the CEM3360
Mounting	Through-hole
Width	—
License	Proprietary (No licence published)
Difficulty	🌡️ Medium through-hole

Clone of CEM3360 dual VCA. Two board design with a mainboard carrying the CEM3360 and a separate IO board for jacks and pots.

Documentation

• Bill of materials (BOM)
• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from Gerbster

2x3 / 1x7 Buffer Active buffered multiple, either two 1-to-3 blocks or one 1-to-7 5 Channel Mixer Simple five input audio mixer CoronDS8 Clone Clone of the Coron DS8 drum synth adapted to Eurorack Curtis VCO CEM3340 style VCO with saw, triangle, sine and pulse at a uniform 10 Vpp Curtis VC ADSR Voltage controlled ADSR envelope generator on the CEM3310 CV-Utils Small CV utility module Echo/Reverb PT2399 based echo and reverb unit Elka Synthex Curtis VCF CEM3320 filter from the Elka Synthex, with ATtiny mode switching

More vca modules

Streams Mutable Instruments Blinds Mutable Instruments Veils Mutable Instruments Dual VCA diysynth VCAs Super Synthesis TVCA Super Synthesis Segue Nonlinear Circuits EDU VCA Erica Synths

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module