Beats

Maker	Marten Agren
Type	Programmable clock sequencer with multiple gate outputs
Mounting	SMD
Width	12 HP
License	Proprietary (MIT covers the code, no hardware grant)
Difficulty	🌋 Fine-pitch SMD

Four layer microcontroller board with a 10V reference, illuminated push buttons and 0603 passives throughout.

Documentation

• Bill of materials (BOM)
• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from Marten Agren

Waves CORDIC accelerated digital VCO on an STM32 VCA Dual OTA VCA with switchable linear and exponential response Kick-808 Analog bass drum voice based on the TR-808 kick circuit Mixer Four channel Eurorack audio and CV mixer EuroPower Regulated Eurorack power bus board with ten module headers Resonator Digital resonator voice with quad CV inputs and stereo audio IO SteinerVCF Steiner-Parker style multimode diode ladder filter VCF Analog voltage controlled filter board

More clock modules

Temps Utile mxmxmx / Patrick Dowling MultiClockDiv HAGIWO Shuffling Clock Multiplier 4ms SCM Breakout 4ms Rotating Clock Divider 4ms RCD Breakout 4ms Quad Clock Distributor Expander 4ms Divide & Conquer Nonlinear Circuits

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module