CV Util

Maker	Johansen Engineering
Type	CV utility module covering voltage, timing and glide
Mounting	Mixed
Width	—
License	Proprietary (No licence published on this repo)
Difficulty	🔥 SMD (0805)

Ships with a generic faceplate gerber so the same PCB can be relabelled for the different utility functions.

Documentation

• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from Johansen Engineering

Formant VCO Analog VCO derived from the Formant style core Drone Oscillator Reverse avalanche BJT drone oscillator with vactrol modulation EuroPowerSupply2 4HP power module converting a 19V laptop supply to plus and minus 12V and 5V MidiToCV MK2 Arduino based MIDI to CV with two CV and gate outputs Steiner VCF Steiner multimode filter, mixed through hole and SMD, plus an ICL8038 VCO board AteOhAte Toms 808 style tom drum voice board sized for a Re:Synthesis panel Effects Unit 1 PT2399 reverb with a bitcrush distortion stage and a 10 bit counter LFO 1 Analog LFO with a 555 based second LFO, mult/mix and NAND, AND, NOT and flip flop logic

More utility modules

Ears Mutable Instruments Kinks Mutable Instruments Links Mutable Instruments Shades Mutable Instruments Mikrophonie Music Thing Modular Buffered Multiple diysynth Offset-Gain Utility diysynth 0HP stuff diysynth

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module