Formant VCO

Clone of Seb Holzapfel's modular synth VCO design. Rev C1 boards were produced and tested. Known erratum: RV7 (FM) is reversed. The repo bundles datasheets for every part used.

Documentation

• Bill of materials (BOM)
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from Johansen Engineering

Drone Oscillator Reverse avalanche BJT drone oscillator with vactrol modulation EuroPowerSupply2 4HP power module converting a 19V laptop supply to plus and minus 12V and 5V MidiToCV MK2 Arduino based MIDI to CV with two CV and gate outputs Steiner VCF Steiner multimode filter, mixed through hole and SMD, plus an ICL8038 VCO board AteOhAte Toms 808 style tom drum voice board sized for a Re:Synthesis panel Effects Unit 1 PT2399 reverb with a bitcrush distortion stage and a 10 bit counter LFO 1 Analog LFO with a 555 based second LFO, mult/mix and NAND, AND, NOT and flip flop logic Moog VCF Moog ladder filter with a wave folder and a 555 based ADSR on the same board set

More oscillator modules

Braids Mutable Instruments Plaits Mutable Instruments Edges Mutable Instruments CHORD VCO HAGIWO 3340 VCO diysynth Tom Yum Voxmachina 2OPFM Super Synthesis Castor & Pollux Winterbloom

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module