LFO 1

Maker	Johansen Engineering
Type	Analog LFO with a 555 based second LFO, mult/mix and NAND, AND, NOT and flip flop logic
Mounting	Mixed
Width	—
License	Open source (MIT over a hardware-only repo)
Difficulty	🔥 SMD (0805)

Rev B fixes Rev A issues, changes the jacks from PJ321 to PJ324 and drops the sine adjustment. Note the MIT licence file sits over a hardware project.

Documentation

• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from Johansen Engineering

Formant VCO Analog VCO derived from the Formant style core Drone Oscillator Reverse avalanche BJT drone oscillator with vactrol modulation EuroPowerSupply2 4HP power module converting a 19V laptop supply to plus and minus 12V and 5V MidiToCV MK2 Arduino based MIDI to CV with two CV and gate outputs Steiner VCF Steiner multimode filter, mixed through hole and SMD, plus an ICL8038 VCO board AteOhAte Toms 808 style tom drum voice board sized for a Re:Synthesis panel Effects Unit 1 PT2399 reverb with a bitcrush distortion stage and a 10 bit counter Moog VCF Moog ladder filter with a wave folder and a 555 based ADSR on the same board set

More lfo modules

DigiLFO diysynth Cha Cha Voxmachina Quad Pingable LFO 4ms Dual LFO/VCO Nonlinear Circuits DIY Modulator Erica Synths TTLFO v2 Ginko Synthese 2LFO (BMC017) Barton Musical Circuits Wave Runner Frequency Central

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module