SympleSequencer

Maker	Johansen Engineering
Type	Step sequencer with a separate clock section, sized for a Hexinverter SympleSeq E2 panel
Mounting	Mixed
Width	—
License	Proprietary (No licence published on this repo)
Difficulty	🔥 SMD (0805)

Clone of Hexinverter SympleSeq. Designed to fit an existing Re:Synthesis faceplate for the Hexinverter SympleSeq E2 rather than a new panel.

Documentation

• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from Johansen Engineering

Formant VCO Analog VCO derived from the Formant style core Drone Oscillator Reverse avalanche BJT drone oscillator with vactrol modulation EuroPowerSupply2 4HP power module converting a 19V laptop supply to plus and minus 12V and 5V MidiToCV MK2 Arduino based MIDI to CV with two CV and gate outputs Steiner VCF Steiner multimode filter, mixed through hole and SMD, plus an ICL8038 VCO board AteOhAte Toms 808 style tom drum voice board sized for a Re:Synthesis panel Effects Unit 1 PT2399 reverb with a bitcrush distortion stage and a 10 bit counter LFO 1 Analog LFO with a 555 based second LFO, mult/mix and NAND, AND, NOT and flip flop logic

More sequencer modules

Grids Mutable Instruments Turing Machine Mk II Music Thing Modular Ornament & Crime (o_C) mxmxmx / Patrick Dowling µO_C (micro Ornament & Crime) jakplugg O_C (Teensy 4.1) PaulStoffregen 6CH Sequencer HAGIWO Leo Leo Voxmachina Teletype monome

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module