Basic Mixer

Maker	Jordan Aceto
Type	Three channel DC coupled mixer with normal and inverted outputs
Mounting	Mixed
Width	8 HP
License	Open source (CC BY 4.0 on the design files)
Difficulty	🔥 SMD (0805)

Input 3 is normalled to a +5V reference so the module doubles as a DC offset source. The README lists the test build and order-ready boxes as unchecked, so treat it as untested.

Documentation

• Bill of materials (BOM)
• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from Jordan Aceto

CEM3340 VCO Analog VCO core board with simultaneous sine, triangle, saw and pulse SSI2130 VCO Through-zero FM analog VCO core built on the SSI2130 SSI2140 12 Stage Phase Shifter Twelve stage analog phaser with selectable stage count and bipolar feedback SSM2164 SVF State variable VCF with an audio range and a super low frequency LFO mode Modulation Source Voltage controlled LFO with white and pink noise and sample and hold Quad ADSR Four digital ADSR envelopes with encoders and a seven segment display Dual 2164 VCA Two independent linear VCAs with manual offsets and attenuated CV Filter Carrier Board Eurorack VCF host board that accepts swappable filter core plug-in PCBs

More mixer modules

Frames Mutable Instruments Mak Mak Voxmachina STMix Befaco Morphader Befaco STMix 1U Befaco EDU Mixer Erica Synths DIY Mixer Erica Synths Battle Ginko Synthese

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module