VCDENV

Maker	Cageysonics
Type	Voltage controlled ADSR with looping LFO modes
Mounting	Mixed
Width	6 HP
License	Proprietary (No licence published for this module)
Difficulty	🌶️ Large through-hole

Clone of Electric Druid ENVGEN8 datasheet circuit. Mainly SMD with a through hole DIP socket for the ENVGEN8, plus through hole electrolytics, regulators and transistors. Attack, decay and sustain all take attenuated CV. The maker asks that Tom Wiltshire at Electric Druid is credited for the circuit and the PIC.

Documentation

• Assembly instructions
• Bill of materials (BOM)
• Schematic
• Fabrication files (PCBA-ready)

Links

• Maker page

More from Cageysonics

3350 Dual Resonant VCF Dual state variable filter on the AS3350 or CEM3350 VCDENV Expander 2HP expander adding TIME control and a unipolar to bipolar converter VCDLFO TAPLFO3 based voltage controlled LFO with clock in and out 4 MIX Four into one audio mixer Star Trails Gated effects send and return loop with wet and dry blend Levels Two channel line and instrument to Eurorack level converter, both directions Unipolar Four bipolar to unipolar converters in 2HP 2HP Buffered Multiple Buffered multiple in 2HP

More envelope modules

Stages Mutable Instruments Peaks Mutable Instruments ADSR diysynth Cycling Envelope Generator diysynth Looping A-R diysynth Sigma Voxmachina EG Super Synthesis ADSR CubuSynth

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module