VCDLFO

Maker	Cageysonics
Type	TAPLFO3 based voltage controlled LFO with clock in and out
Mounting	SMD
Width	—
License	Proprietary (No licence published for this module)
Difficulty	🔥 SMD (0805)

Clone of Electric Druid TAPLFO3 datasheet circuit. 0603 chip parts, so finer than 0805. Adds CV for depth and clock multiplier, a wave bank toggle, clock out and an inverted output to the datasheet circuit. Needs the trimmer set for a zero volt midpoint. A narrower 10HP v2 exists but its files are not published; the maker sells those boards by email.

Documentation

• Assembly instructions
• Bill of materials (BOM)
• Schematic
• Fabrication files (PCBA-ready)

Links

• Maker page

More from Cageysonics

3350 Dual Resonant VCF Dual state variable filter on the AS3350 or CEM3350 VCDENV Voltage controlled ADSR with looping LFO modes VCDENV Expander 2HP expander adding TIME control and a unipolar to bipolar converter 4 MIX Four into one audio mixer Star Trails Gated effects send and return loop with wet and dry blend Levels Two channel line and instrument to Eurorack level converter, both directions Unipolar Four bipolar to unipolar converters in 2HP 2HP Buffered Multiple Buffered multiple in 2HP

More lfo modules

DigiLFO diysynth Cha Cha Voxmachina Quad Pingable LFO 4ms Dual LFO/VCO Nonlinear Circuits DIY Modulator Erica Synths TTLFO v2 Ginko Synthese 2LFO (BMC017) Barton Musical Circuits Wave Runner Frequency Central

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module