Envelope Generator AS3310

Maker	EchelonForce
Type	ADSR envelope generator on the AS3310
Mounting	Mixed
Width	—
License	Proprietary (CC BY-NC-SA 4.0, noncommercial so not an open licence)
Difficulty	🌶️ Large through-hole

A single channel spin off from the same maker's polyphonic envelope board. Split across two PCBs. Passives are 1206 SMD on hand solder pads with through hole DIP sockets for the ICs, and no gerbers are committed.

Documentation

• Assembly instructions
• Schematic

Links

• Source / files on GitHub
• Maker page

More from EchelonForce

Analog Switch Analog switch that routes a signal in the audio path Level Display Signal level display module LFO Stomp LFO built around the Electric Druid STOMPLFO chip MIDI to 16x16 CV Gate MIDI interface with 16 CV and 16 gate outputs Mixer Four input mixer using a single op amp Noise Generator Noise source built around the Electric Druid Noise2 chip Polyphonic Envelope Four channel polyphonic envelope generator using four AS3310s Triple Attenuverter Three channel attenuverter with offset

More envelope modules

Stages Mutable Instruments Peaks Mutable Instruments ADSR diysynth Cycling Envelope Generator diysynth Looping A-R diysynth Sigma Voxmachina EG Super Synthesis ADSR CubuSynth

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module