| Maker | EchelonForce |
|---|---|
| Type | MIDI interface with 16 CV and 16 gate outputs |
| Mounting | Mixed |
| Width | — |
| License | Proprietary (CC BY-NC-SA 4.0, noncommercial so not an open licence) |
| Difficulty | 🌶️ Large through-hole |
Firmware for the Arduino Pro Mini is in the midi_cv_gate_firmware repo, and there is a separate test fixture repo for bringing the board up. Passives are 1206 SMD on hand solder pads with through hole DIP sockets for the ICs, and no gerbers are committed.
Documentation
Links
This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.
← Back to all builds Resources Suggest a correction or a missing module