Quad Attenuverter

Maker	Jypma
Type	Four attenuverters with offset and polarity LEDs
Mounting	Mixed
Width	8 HP
License	Proprietary (No licence published)
Difficulty	🔥 SMD (0805)

Clone of Redrawn in KiCad from an attenuverter design found online. Chip parts are 0603 rather than 0805. The README lists the v1 to v2 changes, including the resistor swap that widens the gain range to plus or minus two.

Documentation

• Assembly instructions
• Bill of materials (BOM)
• Schematic

Links

• Source / files on GitHub
• Maker page

More from Jypma

AS3340 VCO Analogue VCO with octave switch and per note fine tune Dual Mixer Two four channel mixers with buffered inputs and peak LEDs PT2399 Delay PT2399 delay with feedback in 4HP Ray Wilson Dual VCA Dual linear and exponential VCA SCM 140 ADSR Roland System 100 style ADSR envelope Steiner VCF Steiner Parker multimode filter with switch selected modes TH 555 VCO Thomas Henry 555 based VCO DuinoRack ATmega328 module with screen and encoders running swappable firmware

More utility modules

Ears Mutable Instruments Kinks Mutable Instruments Links Mutable Instruments Shades Mutable Instruments Mikrophonie Music Thing Modular Buffered Multiple diysynth Offset-Gain Utility diysynth 0HP stuff diysynth

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module