4Ch Mixer

Maker	CATs Eurosynth
Type	4 channel mixer for audio or CV
Mounting	SMD
Width	4 HP
License	Proprietary (Hardware CC BY-NC-SA 4.0, noncommercial so not an open licence)
Difficulty	🔥 SMD (0805)

0805 passives, so it is a reasonable first surface mount build.

Documentation

• Bill of materials (BOM)
• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from CATs Eurosynth

Power Module Mains input module with a power switch and rail indicator LEDs Atari Punk Console Stepped tone generator based on the classic 556 Atari Punk Console Baby8 Sequencer 8 step CV sequencer built from a 4017 counter Clock Divider Binary clock divider with buffered outputs Abakus 14HP counter and gate processing module Manual Gate Manual gate and trigger button module Envelope Follower Envelope follower turning an audio input into CV Vactrol VCF Voltage controlled filter using vactrols for the cutoff control

More mixer modules

Frames Mutable Instruments Mak Mak Voxmachina STMix Befaco Morphader Befaco STMix 1U Befaco EDU Mixer Erica Synths DIY Mixer Erica Synths Battle Ginko Synthese

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module