Atari Punk Console

Maker	CATs Eurosynth
Type	Stepped tone generator based on the classic 556 Atari Punk Console
Mounting	Through-hole
Width	4 HP
License	Proprietary (Hardware CC BY-NC-SA 4.0, noncommercial so not an open licence)
Difficulty	🧊 Low-count through-hole

Clone of Forrest Mims Stepped Tone Generator, the Atari Punk Console. The Forrest Mims stepped tone generator put into a Eurorack panel.

Documentation

• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from CATs Eurosynth

Power Module Mains input module with a power switch and rail indicator LEDs Baby8 Sequencer 8 step CV sequencer built from a 4017 counter 4Ch Mixer 4 channel mixer for audio or CV Clock Divider Binary clock divider with buffered outputs Abakus 14HP counter and gate processing module Manual Gate Manual gate and trigger button module Envelope Follower Envelope follower turning an audio input into CV Vactrol VCF Voltage controlled filter using vactrols for the cutoff control

More oscillator modules

Braids Mutable Instruments Plaits Mutable Instruments Edges Mutable Instruments CHORD VCO HAGIWO 3340 VCO diysynth Tom Yum Voxmachina 2OPFM Super Synthesis Castor & Pollux Winterbloom

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module