Power Module

Maker	CATs Eurosynth
Type	Mains input module with a power switch and rail indicator LEDs
Mounting	Through-hole
Width	4 HP
License	Proprietary (Hardware CC BY-NC-SA 4.0, noncommercial so not an open licence)
Difficulty	🌡️ Medium through-hole

Feeds a Meanwell RT-65B or similar. All mains side connections use isolated 6.3 mm FastOn tabs behind a fused inlet.

Documentation

• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from CATs Eurosynth

Atari Punk Console Stepped tone generator based on the classic 556 Atari Punk Console Baby8 Sequencer 8 step CV sequencer built from a 4017 counter 4Ch Mixer 4 channel mixer for audio or CV Clock Divider Binary clock divider with buffered outputs Abakus 14HP counter and gate processing module Manual Gate Manual gate and trigger button module Envelope Follower Envelope follower turning an audio input into CV Vactrol VCF Voltage controlled filter using vactrols for the cutoff control

More power modules

PSU diysynth Su Su Voxmachina Lunch Bus Befaco Micronova Winterbloom stv WGD Modular Melper Greenface Labs Super Melper Greenface Labs Octobus My Modular Journey

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module