Single Attenuator

Maker	CATs Eurosynth
Type	Single channel attenuator with a 60 mm slider
Mounting	Through-hole
Width	2 HP
License	Proprietary (Hardware CC BY-NC-SA 4.0, noncommercial so not an open licence)
Difficulty	🧊 Low-count through-hole

Passive attenuation with a long throw fader in 2HP.

Documentation

• Bill of materials (BOM)
• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from CATs Eurosynth

Power Module Mains input module with a power switch and rail indicator LEDs Atari Punk Console Stepped tone generator based on the classic 556 Atari Punk Console Baby8 Sequencer 8 step CV sequencer built from a 4017 counter 4Ch Mixer 4 channel mixer for audio or CV Clock Divider Binary clock divider with buffered outputs Abakus 14HP counter and gate processing module Manual Gate Manual gate and trigger button module Envelope Follower Envelope follower turning an audio input into CV

More utility modules

Ears Mutable Instruments Kinks Mutable Instruments Links Mutable Instruments Shades Mutable Instruments Mikrophonie Music Thing Modular Buffered Multiple diysynth Offset-Gain Utility diysynth 0HP stuff diysynth

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module