Clock Divider (Slim Line)

Maker	CATs Eurosynth
Type	Surface mount clock divider in 2HP
Mounting	SMD
Width	2 HP
License	Proprietary (Hardware CC BY-NC-SA 4.0, noncommercial so not an open licence)
Difficulty	🌋 Fine-pitch SMD

Mixes 0402 and 0603 passives on the main board.

Documentation

• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from CATs Eurosynth

Power Module Mains input module with a power switch and rail indicator LEDs Atari Punk Console Stepped tone generator based on the classic 556 Atari Punk Console Baby8 Sequencer 8 step CV sequencer built from a 4017 counter 4Ch Mixer 4 channel mixer for audio or CV Clock Divider Binary clock divider with buffered outputs Abakus 14HP counter and gate processing module Manual Gate Manual gate and trigger button module Envelope Follower Envelope follower turning an audio input into CV

More clock modules

Temps Utile mxmxmx / Patrick Dowling MultiClockDiv HAGIWO Shuffling Clock Multiplier 4ms SCM Breakout 4ms Rotating Clock Divider 4ms RCD Breakout 4ms Quad Clock Distributor Expander 4ms Divide & Conquer Nonlinear Circuits

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module