Pi Pico Random Looping Sequencer

Maker	DIY Synth Manila
Type	Raspberry Pi Pico sequencer with quantised random CV and probability driven mutation
Mounting	Through-hole
Width	—
License	Proprietary (Licence marked "none yet" on this repo)
Difficulty	🌡️ Medium through-hole

One to 16 steps with over 40 scales, an OLED menu and rotary encoder. On each clock a probability decides whether a step gets a fresh random value, so the loop slowly mutates. Output goes through an MCP4725 DAC. The archived Random-Looping-Sequencer repo holds the older firmware only.

Documentation

• Schematic

Links

• Source / files on GitHub
• Maker page

More from DIY Synth Manila

2164 Quad Exponential VCA Quad exponential VCA on the AS2164 with normalled signal and CV chains and a mix output 3310 ADSR Voltage controlled ADSR on the AS3310 with a CV input and attenuator on every stage 3320 VCF Four pole low pass filter on the AS3320 with voltage controlled resonance 3330 Dual Lin/Exp VCA Dual VCA on the AS3330 with a knob that blends between linear and exponential response 3340 VCO Analog VCO on the AS3340 with saw, triangle, sine and pulse outputs Electric Druid VCDO1 Wavetable oscillator around the Electric Druid VCDO1 chip, with main and sub outputs Multi Saturation Module Multi stage saturation with a voltage controlled wet and dry mix PT2399 Delay Lo-fi PT2399 delay with voltage controlled time and a feedback overdrive jumper

More sequencer modules

Grids Mutable Instruments Turing Machine Mk II Music Thing Modular Ornament & Crime (o_C) mxmxmx / Patrick Dowling µO_C (micro Ornament & Crime) jakplugg O_C (Teensy 4.1) PaulStoffregen 6CH Sequencer HAGIWO Leo Leo Voxmachina Teletype monome

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module