RingMod

Maker	My Modular Journey
Type	Transformer based active ring modulator
Mounting	Through-hole
Width	8 HP
License	Open source (CC BY-SA 3.0, MIT or GPL-3.0 over hardware-only repos)
Difficulty	🌡️ Medium through-hole

Clone of Based on Ken Stone's CGS active real ring modulator. A build guide is promised but not yet published. The README says all rights to the circuit remain with Ken Stone.

Documentation

• Bill of materials (BOM)
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from My Modular Journey

1U Attenuverter 1U attenuverter with 5V offset reference, buildable as a passive attenuator 1U Buffered Mult 1U buffered multiple for splitting CV and audio without droop 1U LFO Small 1U low frequency oscillator for modulation duties 2HP Buffered Multiple 1 to 3 buffered multiple in 2HP Octobus Eurorack PSU and bus board fed from a wall wart transformer Tuna Arduino based chromatic tuner with a 7 segment display

More effect modules

Warps Mutable Instruments Clouds Mutable Instruments PHRSR Super Synthesis CHORUS Super Synthesis ROOM Super Synthesis SCANNER Super Synthesis RAT TOIL Modular SoftSynthetics DSP Owen-Patrick

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module