Tuna

Clone of Eurorack adaptation of the LookMumNoComputer and Tune-O-Matic tuner. Firmware is Jos Bouten's Tune-O-Matic sketch, which lives in a separate repo. The panel measures 30.1mm wide, which is 6HP.

Documentation

• Assembly instructions
• Bill of materials (BOM)
• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from My Modular Journey

1U Attenuverter 1U attenuverter with 5V offset reference, buildable as a passive attenuator 1U Buffered Mult 1U buffered multiple for splitting CV and audio without droop 1U LFO Small 1U low frequency oscillator for modulation duties 2HP Buffered Multiple 1 to 3 buffered multiple in 2HP Octobus Eurorack PSU and bus board fed from a wall wart transformer RingMod Transformer based active ring modulator

More utility modules

Ears Mutable Instruments Kinks Mutable Instruments Links Mutable Instruments Shades Mutable Instruments Mikrophonie Music Thing Modular Buffered Multiple diysynth Offset-Gain Utility diysynth 0HP stuff diysynth

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module