Octobus

Maker	My Modular Journey
Type	Eurorack PSU and bus board fed from a wall wart transformer
Mounting	Through-hole
Width	—
License	Open source (CC BY-SA 3.0, MIT or GPL-3.0 over hardware-only repos)
Difficulty	🌡️ Medium through-hole

Clone of Based on Ray Wilson's Music From Outer Space Wall Wart Power Supply. The README states the files are for educational and personal use only and that all design rights remain with MFOS.

Documentation

• Bill of materials (BOM)
• Schematic
• Fabrication files (PCBA-ready)

Links

• Source / files on GitHub
• Maker page

More from My Modular Journey

1U Attenuverter 1U attenuverter with 5V offset reference, buildable as a passive attenuator 1U Buffered Mult 1U buffered multiple for splitting CV and audio without droop 1U LFO Small 1U low frequency oscillator for modulation duties 2HP Buffered Multiple 1 to 3 buffered multiple in 2HP RingMod Transformer based active ring modulator Tuna Arduino based chromatic tuner with a 7 segment display

More power modules

PSU diysynth Su Su Voxmachina Lunch Bus Befaco Micronova Winterbloom stv WGD Modular Melper Greenface Labs Super Melper Greenface Labs Power Module CATs Eurosynth

This is a third-party open-source design, listed here as a build reference. Specs are researched from public sources; check the source repo and store for the current BOM, panel, and revision before ordering parts. Corrections welcome.

← Back to all builds Resources Suggest a correction or a missing module