Get a free upgrade to WaveStack Modulate for iOS with code MODULATELAUNCH Free upgrade: MODULATELAUNCH

Concrète In

Recording expander for Concrète, for VCV Rack

The Concrète In module panel in VCV Rack.

Concrète In records into the lanes of Concrète. Place it directly to Concrète’s left. Each of its four rows belongs to one lane and sits level with that lane on Concrète’s screen, with a REC button, a GATE input and stereo inputs.

Recording

The REC button and the GATE input both arm a lane, the button as a latch and the gate while it is high. A lane records while it is armed, has a cable in IN L or IN R, and the tape is moving. IN R is normalled from IN L, so a mono source records to both sides. The REC light blinks while the lane is armed and stays lit while it records.

While a lane is recording it plays its input through its curves, which lets you hear the take with the lane’s VOL, FILTER and PAN applied. When recording stops, the take becomes a clip at the position where it was made and is spliced in like any other clip. A punch-in over the middle of a clip leaves the rest of that clip playing after the take.

Recording held across the loop end splits into two takes: one runs to the end of the loop and the next starts at bar 1. A reset or a seek also ends a take. A take can be up to 1.25 times the length of the loop plus 2 seconds, with a limit of 120 seconds.

Takes are saved inside the patch as 16-bit stereo WAV files, so the patch keeps them with no files of their own to manage.

Inputs

Per lane: REC button, GATE, IN L and IN R (normalled from IN L).

Patch ideas

Overdubbing a loop. Patch a voice into one lane’s inputs and press REC while the loop plays. The take lands on the bars where you played it, and pressing REC again on the same lane replaces what you record over.

Gated recording from a sequencer. Patch a gate from a sequencer into a lane’s GATE. The lane records only on the bars you want, and each gate leaves its own clip on the lane.

Recording from another lane. Patch one lane’s L and R outputs into another lane’s inputs and record it with different curves in place, then clear the first lane.

In the synthesis guide

  • Sampling: Speed, Pitch, Loops and Reverse

    A sampler plays a recording back as an instrument. Changing the playback speed changes the pitch and the length together, and loops let a short recording sustain.

Pair with