Get a free upgrade to WaveStack Modulate for iOS with code MODULATELAUNCH Free upgrade: MODULATELAUNCH

VCV Rack

These are free, open-source modules for VCV Rack, and most also run on the 4ms MetaModule.

53 posts

Canopy

Canopy

· VCV Rack

Canopy is a physically modelled steel tongue drum for VCV Rack. Drops fall under gravity past leaves you place and sound the drum where they land, and a gate input strikes the tongues directly.

#plugins #eurorack

Concrète In

Concrète In

· VCV Rack

Concrète In is a recording expander for the Concrète clip sampler in VCV Rack. Each of the four lanes gets stereo inputs, a record button and a record gate, and each take becomes a clip where it was made.

#plugins #eurorack

Concrète

Concrète

· VCV Rack

Concrète is a clip sampler for VCV Rack with four lanes on a tape loop of 1 to 8 bars. You place, trim and splice samples on the screen and draw volume, filter, pan and pitch curves across the loop.

#plugins #eurorack

Hocket

Hocket

· VCV Rack

Hocket is a router for VCV Rack that sends one line of notes or audio to eight channels in turn. Eleven patterns set the order, and pitch, gate and stereo audio all follow the same selection.

#plugins #eurorack

Cistern

Cistern

· VCV Rack

Cistern is a reverb for VCV Rack modelled on the geometry of real spaces: three cisterns built from published plans and nine scanned rooms, with two sources and a listener placed on screen.

#plugins #eurorack

The twelve SFS Super VCV Rack panels are shown in two rows: 2OPFM, PHRSR, SVFs, EG, VCAs, SCANNER, TVCA, CHORUS, ROOM, OTAVCAs, S&H and PNGBL. Each panel is black with gold lettering.

SFS Super

· VCV Rack

SFS Super ports twelve Super Synthesis Eurorack modules to VCV Rack (2OPFM, PHRSR, SVFs, EG, VCAs, SCANNER, TVCA, CHORUS, ROOM and three unreleased designs), each modelled from its schematic or firmware.

#plugins #eurorack

Strata

Strata

· VCV Rack

Strata is a wavetable voice for VCV Rack whose table is a three-dimensional volume of frames. Place a point with X, Y and Z, move it through clocked waypoints, and shape or break apart the frame it reads.

#plugins #eurorack

Canon title card: the module name over a four channel arpeggiator descriptor, with the panel alongside showing the chord keyboard and the four channel strips

Canon

· VCV Rack

Canon is a chord arpeggiator for VCV Rack. Four channels read one progression, each with its own pattern, octave and clock, and each free to wander from the chord.

#plugins #eurorack

Carillon title card: the module name over the line 'Tuned bells, connected by wire', with the panel alongside showing the ring of bells and the rods drawn between them

Carillon

· VCV Rack

Carillon is a physically modelled bell tower for VCV Rack. Its twenty-five tuned bells are joined by rods you draw, and a strike ripples down them as far as velocity and reach allow.

#plugins #eurorack

Count title card: the module name over a six channel clock descriptor, with the narrow panel alongside showing six rows of div, mask and output

Count

· VCV Rack

Count is a narrow clock for VCV Rack. Its six gate outputs each have their own rate and their own mask over one cycle of steps, set with twelve knobs in 8HP.

#plugins #eurorack

Flock In title card: the module name over a stereo in for Flock descriptor, with the narrow expander panel alongside a Flock

Flock In

· VCV Rack

Flock In is an expander for the Flock granular voice in VCV Rack. Patch audio in and the birds sing grains of it instead of sines, shaped by envelope, reach and freeze controls.

#plugins #eurorack

Flock title card: the module name over the line 1024 noisy birds, 1 hungry hawk, with the panel alongside showing the flock drawn in perspective

Flock

· VCV Rack

Flock is a microtonal granular voice for VCV Rack built on a real flock. Up to a thousand birds fly as a murmuration, every call is a grain, and height in the flock is pitch.

#plugins #eurorack

Field title card: the module name over a 19 tap algorithmic random voltage array descriptor, with the panel alongside showing the hexagonal grid of jacks

Field

· VCV Rack

Field is a random voltage source for VCV Rack. Nineteen jacks on a hexagonal grid read one smooth random field, so neighbouring outputs are related by geometry.

#plugins #eurorack

PolyKit In title card: the expander panel alongside a Kit, showing the matrix of thirteen input columns by eight instrument rows

PolyKit In

· VCV Rack

PolyKit In is an expander for Kit in VCV Rack. It gives every input of every Kit instrument its own jack, in thirteen columns by eight rows, for racks where each drum is patched from a separate source rather than from one poly cable.

#plugins #eurorack

The Spool title card shows the module name above the words 4 channel tape instrument, with the panel alongside showing the four coloured tape lanes.

Spool

· VCV Rack

Spool is a tape instrument for VCV Rack modelled on the Mellotron. It plays four short tapes from gates with varispeed pitch, and each tape carries on from where it stopped instead of rewinding.

#plugins #eurorack

Kit title card: the module name over a physically modelled drum voice descriptor, with the panel alongside showing the drawn head and four rows of trimpots

Kit

· VCV Rack

Kit is a physically modelled drum for VCV Rack. It holds eight instruments on one panel. Each one models a struck membrane mode by mode, and the presets range from tom and timpani to gong and tabla.

#plugins #eurorack

OP MORPH title card: the module name over an algorithm morphing descriptor, with the expander panel alongside showing the slot field and routing matrix

OP MORPH

· VCV Rack

OP MORPH is an expander for Operator in VCV Rack. It shows the DX7 operator routing on screen as a matrix and moves through a 4x4 field of sixteen stored routings, blending between them.

#plugins #eurorack

The Sigma title card shows the module name above the words additive synth voice, with the panel alongside showing the spectrum display and macro controls.

Sigma

· VCV Rack

Sigma is an additive synthesizer for VCV Rack modelled on the Crumar GDS. It sums up to 64 sine partials, and velocity crossfades between two complete spectra.

#plugins #eurorack

The Trace title card shows the module name above the line paint with your CV, with the panel alongside showing four coloured curves on the paper loop.

Trace

· VCV Rack

Trace is a drawn-CV sequencer for VCV Rack. Four brushes write onto a moving paper loop, and four read heads play the shapes back.

#plugins #eurorack

Wheel title card: the module name over a hurdy-gurdy drone voice descriptor, with the panel alongside showing the wheel render and the six string columns

Wheel

· VCV Rack

Wheel is a hurdy-gurdy drone instrument for VCV Rack. One rosined wheel bows six strings at once, and the buzzing bridge under the trompette string plays the rhythm.

#plugins #eurorack

The Slice VCV Rack module panel, a stereo buffer slicer with a waveform screen, EFFECT and RATIO knobs, and a row of CV inputs.

Slice

· VCV Rack

Slice is a stereo buffer slicer for VCV Rack. It divides incoming audio into slices on a grid and alters one slice in every N by cutting, swapping, delaying, shuffling, reversing, stuttering or repitching it.

#plugins #eurorack

Chime VCV Rack module panel, an eight-note resonating drone machine

Chime

· VCV Rack

Chime is an eight-note resonating drone machine for VCV Rack, after a xylophone whose resonator tubes rotate beneath the bars. Each note blooms as its tube swings through centre.

#plugins #eurorack

Crystal VCV Rack module panel, a 3D crystal echo chamber with quad outputs

Crystal

· VCV Rack

Crystal is a 3D echo chamber for VCV Rack shaped like a real crystal. It takes stereo in and gives quad out, with sixteen crystal habits traced by ray casting and four listeners standing inside the shape.

#plugins #eurorack

Fill VCV Rack module panel, a self-playing eight-channel drum machine

Fill

· VCV Rack

Fill is a self-playing eight-channel drum machine for VCV Rack. It has 343 built-in pattern sets across three banks, an internal pressure value that builds and is released in fills, and a PHRASE control that sets how often fills play.

#plugins #eurorack

Key VCV Rack module panel, a four-channel patch-wide quantizer

Key

· VCV Rack

Key is a quantizer for VCV Rack that takes its key from the patch. It reads the plugin's shared Root and Scale signals, so it changes key along with every other module that reads them, and it supports sub-scales, Scala files and microtonal scales.

#plugins #eurorack

Loom VCV Rack module panel, a coupled eight-string physical model

Loom

· VCV Rack

Loom is an eight-string physical-model voice for VCV Rack. The strings share one bridge, so a struck string sets its neighbours ringing, and one continuous exciter control moves between hammer, pluck, bow and wind.

#plugins #eurorack

The SLIDE XP VCV Rack expander panel, which has a row of jacks and a trimpot for each of Slide's eight strings.

SLIDE XP

· VCV Rack

SLIDE XP is an expander for Slide in VCV Rack. It puts the eight strings on eight jacks, each with a gate in, velocity in, and level trimpot, so every string can go to its own destination.

#plugins #eurorack

The Slide VCV Rack module panel, a physical model of an electric lap steel.

Slide

· VCV Rack

Slide is an electric lap steel model for VCV Rack. It has eight waveguide strings stopped by a steel bar, with bar slant for chords, rate-based glide, a volume-swell pedal and ten steel-guitar tunings.

#plugins #eurorack

Arrange VCV Rack module panel, a song-form sequencer with eight phrases and four per-instrument clock buses

Arrange

· VCV Rack

Arrange is a song-form sequencer for VCV Rack. Eight phrases hold your song's sections (bar length, key, tempo) and four per-instrument clock buses drop each instrument in and out as the arrangement moves.

#plugins #eurorack

Beat VCV Rack module panel, a single-voice drum sequencer with eight patterns of sixteen steps

Beat

· VCV Rack

Beat is a single-voice drum sequencer for VCV Rack. One Beat is one drum: eight patterns of sixteen steps, each step with velocity, accent, and probability, all edited on-screen.

#plugins #eurorack

Chance VCV Rack module panel, a generative melodic sequencer that walks a seeded line through a scale

Chance

· VCV Rack

Chance is a generative melodic sequencer for VCV Rack. You don't program notes: you set a key and a few probabilities, and Chance walks a line through the scale. Every decision is seeded, so a pattern is a fixed, repeatable melody rather than noise.

#plugins #eurorack

Meter X

Meter X

· VCV Rack

Meter X is an expander for Meter that adds a 24 PPQN clock, a run gate, and triggers every 1 to 128 bars. Each bar trigger has a pie chart showing how far through its cycle the song is, for structure that changes over minutes rather than beats.

#plugins #eurorack

Meter

Meter

· VCV Rack

Meter is a time-signature-aware master clock for VCV Rack. It has six musical subdivisions with per-output swing, swung and grid jacks side by side, CV control of the time signature, and external clock sync.

#plugins #eurorack

Note VCV Rack module panel, a pitched CV/gate sequencer with a scale-quantized pitch matrix

Note

· VCV Rack

Note is a pitched CV/gate sequencer for VCV Rack built on the same design as Beat. It has eight patterns with per-step velocity, accent and probability, and a pitch matrix quantized to 19 scales including just intonation and gamelan tunings.

#plugins #eurorack

Play VCV Rack module panel, a polyphonic multisample player for .sfz and DecentSampler instruments

Play

· VCV Rack

Play is a polyphonic multisample player for VCV Rack. It loads .sfz or DecentSampler .dspreset instruments into a 16-voice engine with velocity layers, round-robins, loops, and per-note tuning.

#plugins #eurorack

Record VCV Rack module panel, an auto-sampler that captures a voice across notes and velocities to an .sfz instrument

Record

· VCV Rack

Record is an auto-sampler for VCV Rack. Point it at any voice in your rack, press record, and it plays that voice across a range of notes and velocities and writes a complete multisampled instrument to disk: WAVs plus an .sfz.

#plugins #eurorack

OP ENV VCV Rack module panel, a standalone DX7 operator envelope generator with per-stage rate and level offsets

OP ENV

· VCV Rack

OP ENV is a standalone DX7 operator envelope generator for VCV Rack. It loads a voice from a .syx bank and turns its carrier envelope into a gate-driven CV, with per-stage offsets.

#plugins #eurorack

Operator VCV Rack module panel, a 6-operator DX7-style FM synth voice with voice selection and polyphonic output

Operator

· VCV Rack

Operator is a 6-operator FM synth voice for VCV Rack in the Yamaha DX7 lineage. It loads DX7 .syx cartridges, plays them polyphonically, and comes with four DX7 patches by Brian Eno.

#plugins #eurorack

Cycle VCV Rack module panel, a bar-synced quad LFO with four channels, morphing shapes, and clock and bar inputs

Cycle

· VCV Rack

Cycle is a bar-synced quad LFO for VCV Rack. Its four channels lock to your song's bar grid, with morphing shapes, per-channel depth and clock-quantized staircases, and it is built to pair with Meter.

#plugins #eurorack

Band VCV Rack module panel: harmonic bandpass bank with four colored bands and a spectrum display

Band

· VCV Rack

Band is a harmonic bandpass bank for VCV Rack inspired by Suzanne Ciani. Four narrow filters lock to integer harmonics of a shared fundamental that auto-tracks the input.

#plugins #eurorack

Gravity VCV Rack module panel: 30HP chaos and motion engine with a large circular display and a mandala of CV/gate jacks

Gravity

· VCV Rack

Gravity is a 30HP multi-mode chaos and motion engine for VCV Rack. Six engines drive a moving point read out as bipolar X/Y CVs, six sector CVs, and six boundary-ray gates.

#plugins #eurorack

Muse VCV Rack module panel: recreation of the Triadex Muse with eight sliders and a tap-state LED column

Muse

· VCV Rack

Muse is a VCV Rack recreation of the 1972 Triadex Muse by Edward Fredkin and Marvin Minsky. Its eight sliders select signals from a network of binary counters and a shift register to generate long, structured algorithmic melodies.

#plugins #eurorack

The Shift VCV Rack module panel, a 4-output CV shift register with delay, divider and mode controls for each lane.

Shift

· VCV Rack

Shift is a 4-output CV shift register for VCV Rack. It takes one signal and produces four outputs, each with its own delay, divider and parallel or cascade mode, plus a Jumble output that picks between them at random.

#plugins #eurorack

Vac VCV Rack module panel: semi-stable attack/release envelope generator with per-stage stability controls

Vac

· VCV Rack

Vac is a semi-stable attack/release envelope generator for VCV Rack. A stability control on each stage varies its timing from one trigger to the next, as a vactrol's response drifts.

#plugins #eurorack

Meter, Beat, and Note VCV Rack modules patched together as a master clock and dual-voice sequencer system

Signal Function Set Sequencer System

· VCV Rack

Signal Function Set Sequencer System is a modular rhythm and pitch sequencer system for VCV Rack. Arrange holds the song form, Meter is the time-signature-aware master clock (with Meter X for long-form structure), Beat sequences drums, and Note sequences pitched voices.

#plugins #eurorack

The Swell VCV Rack module panel, a ping-driven envelope generator with Delta, Rise, Fall and Curve controls and a scope display.

Swell

· VCV Rack

Swell is a ping-driven envelope generator for VCV Rack. Each trigger adds a rise that saturates softly near the top, and the envelope decays back toward zero with a curve you can set from linear to exponential.

#plugins #eurorack

Intone VCV Rack module panel: formant synthesis voice with five formant cells and vowel morph slider

Intone

· VCV Rack

Intone is a formant synthesis voice for VCV Rack based on the IRCAM CHANT project. It has five parallel FOF cells, a vowel morph, and modes for audio excitation and triggered grains.

#plugins #eurorack

The Tine VCV Rack module panel, a pingable 3rd-order resonator based on the Pygmy Gamelan circuit.

Tine

· VCV Rack

Tine is a tunable 3rd-order pingable resonator for VCV Rack, based on the Gamelan Resonator circuit from Paul DeMarinis' Pygmy Gamelan (1973).

#plugins #eurorack #maxforlive

Phase VCV Rack module panel showing dual sample loopers with waveform display, drift controls, and stereo output

Phase

· VCV Rack

Phase is a dual sample looper for VCV Rack inspired by Steve Reich's tape phase compositions. Its two loops drift against each other, so their alignment shifts slowly out of step and back again.

#plugins #eurorack

Overtone VCV Rack module panel: additive synthesis VCO with eight harmonic toggle switches and waveform display

Overtone

· VCV Rack

Overtone is an additive synthesis VCO for VCV Rack that builds waveforms by toggling individual harmonics of the overtone series. Mask and filter inputs put the harmonic selection under CV control.

#plugins #eurorack

Fugue VCV Rack module panel: 8-step harmonic deviation sequencer with three voices and per-voice wander controls

Fugue

· VCV Rack

Fugue is an 8-step harmonic deviation sequencer for VCV Rack. It generates three voices of counterpoint from a single melodic sequence using interval offsets.

#plugins #eurorack

GSX VCV Rack module panel: real-time granular synthesis with grain density, duration, frequency, and spread controls

GSX

· VCV Rack

GSX is a real-time synthetic granular synthesis module for VCV Rack, based on Barry Truax's GSX system. Grain density, duration, pitch range and stereo spread are all under CV control.

#plugins #eurorack

Drift VCV Rack module panel: 4-channel chaos LFO with shape, stability, frequency, phase, center, and spread knobs

Drift

· VCV Rack

Drift is a four-channel chaos LFO for VCV Rack. One control spreads the four outputs apart in phase, the waveform morphs from sine through square to a slow random walk, and each output can drift on its own.

#plugins #eurorack